Building the Root 2 CNC Multitool Router/Printing
Jump to navigation
Jump to search
How Much Plastic[edit | edit source]
2x 1kg spools seem to be about the right amount of plastic. That that said if you are not already a 3D printer expert expect to see some failed prints that will need reprinted.
Print Time[edit | edit source]
ABS or PLA[edit | edit source]
ABS will have a strength advantage and provides the option to spray on acetone to perhaps help bond the layers together better.
Settings[edit | edit source]
Resolution[edit | edit source]
0.25-0.35
Infill[edit | edit source]
50%
Notes[edit | edit source]
- Print with 3-4 perimeters
- Print with ABS but PLA will be fine though your mileage may vary